oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0522 email: sales@oscilent.com product specification www.oscilent.com rev a january 2011 oscilent controlled document ordering code / part number product description 807-sl110.0m-a 110.0mhz if saw bandpass filter specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency response o smith chart notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 807-sl110.0m-a january 2011 rev a 110.0mhz if saw bandpass filter product specification p. 1 www.oscilent.com mechanical dimensions (mm) test circuit matching network for 1000 ? /500 ? balanced configuration pin description a, b, c, f, g, h ground i input + j input - d output + e output - test fixture & values input l1=27 nh, l2=180 nh, q > 35 output l3=33 nh, l4=150 nh, q > 35 source/load impedance 1000/500 ?
oscilent part number 807-sl110.0m-a january 2011 rev a 110.0mhz if saw bandpass filter product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c -20 - 85 storage temperature range c -40 - 105 maximum dc voltage v - - 3 maximum input power dbm - - 20 source impedance (balanced ended) (1) ? - 1000 - load impedance (balanced ended) (1) ? - 500 - notes: with matching network (ref. test ing environment circ uit as shown above). those impedances could be modified wi th different impedance values and/or structures, if necessary. electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz - 110.0 - insertion loss at fo db - 10.0 11.5 amplitude ripple (fo 0.3 mhz) db p-p - 0.55 1.0 phase linearity (fo0.615mhz) deg rms - 3.5 4.5 phase linearity (fo0.620mhz) deg rms - 3.5 4.5 temperature coefficient ppm/c - -0.03 - bandwidth at ?5.0 db mhz 0.630 0.660 - bandwidth at ?33.0 db mhz - 0.890 - template on the amplitude, reference is loss at fc attenuation at fc 0. 63mhz db - 4.5 5.0 attenuation at fc 0.9mhz db 32 35 - attenuation at fc 1.7mhz db 33 36 - attenuation at fc 2mhz db 35 37 - attenuation at fc 9mhz db 45 48 -
oscilent part number 807-sl110.0m-a january 2011 rev a 110.0mhz if saw bandpass filter product specification p. 3 www.oscilent.com frequency response bandwidth at ?5.0 db bandwidth at ?33.0 db amplituderipple (fo0.3mhz) attenuation
oscilent part number 807-sl110.0m-a january 2011 rev a 110.0mhz if saw bandpass filter product specification p. 4 www.oscilent.com phase linearity (fo0.615mhz) phase linearity (fo0.620mhz) attenuation
oscilent part number 807-sl110.0m-a january 2011 rev a 110.0mhz if saw bandpass filter product specification p. 5 www.oscilent.com smith chart
|
